Current position > News detail
『Turbine flowmeter manufacturer』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Which brand of gas turbine flowmeter is better? Hello, KNKE, a manufacturer of imported gas turbine flow meters from the United States, is pleased to answer your question. The recommended brand for gas turbine flow meters is KNKE from the United States. Its product advantages are as follows:
1. Gas turbine flow meters have high accuracy, low pressure loss, low initial flow rate, automatic tracking and compensation for temperature, pressure, and flow blockage. They are battery powered, can output multiple signals, use imported bearings, have a long service life, and are easy to install. The intelligent speed flow meter integrates flow, temperature, and pressure detection functions, and can perform temperature and pressure compensation. It has the advantages of high accuracy, good repeatability, wide measurement range, and easy installation and use. 2. The KNKE gas turbine flowmeter adopts a new type of microprocessor and high-performance integrated chip, with high calculation accuracy, powerful overall functions, and superior performance.
3、 Adopting low-power high-tech, the whole machine has low power consumption. It can be powered by a built-in 3.6V battery for long-term operation, and can also be powered by an external 24V power supply.
4、 Adopting a new type of sensor, it has good anti vibration and anti pulsating flow performance, is not easy to corrode, has good reliability, and has a long service life.
5、 According to the flow frequency signal, the instrument coefficient can be automatically linearly corrected in eight segments, which can improve the calculation accuracy of the instrument according to user needs.
6、 Adopting EEPROM data storage technology, it has the function o
7、 The flowmeter head can rotate 180 °, making installation and use simple and convenient.
8、 High precision measurement can generally reach ± 1.5% and ± 1.0%.
9、 Good repeatability, short-term repeatability can reach 0.05% to 0.2%. It is precisely because of its good repeatability that flow meters are preferred in trade settlement. The above is the answer to this question from KNKE, a manufacturer of imported gas turbine flow meters from the United States. If you have purchasing needs for gas turbine flow meters, please visit the official website of KNKE in the United States for selection and procurement, or inquire with KNKEs professional technical personnel to seek the most suitable product for you.
2. How to install the turbine flowmeter correctly? Hello, KNKE, a manufacturer of turbine flow meters imported from the United States, is pleased to answer your question.
1、 Turbine flow meters can be installed horizontally or vertically. When installed vertically, the fluid flow direction should be from bottom to top, and the liquid must fill the pipeline without bubbles. The direction of the flow of hail should be consistent with the direction indicated by the arrow on the sensor housing. The upstream end should have at least a certain length of straight pipe section, with smooth, clean and tidy inner walls, and no defects such as dents, accumulation, peeling, etc. 2. The axis of the sensor tube should be aligned with the axis of the adjacent pipeline. The gasket for connecting the seal must not penetrate deep into the pipe. Sensors should be kept away from extern