Current position > Product detail
『Price of Yokogawa Electromagnetic Flow Meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. The meaning of the Yokogawa AXG electromagnetic flowmeter model
The "AXG" in the Yokogawa AXG electromagnetic flowmeter model represents the ADMAG TI series to which it belongs, and the following number is directly checked to indicate the instrument diameter size in millimeters. 1. Analysis of Model Meaning: The specific model of Yokogawa AXG electromagnetic flowmeter (such as AXG00
2, AXG005) follows a clear naming convention: • "AXG": This is the product series code, representing its belonging to Yokogawas ADMAG TI (Total Insight) series. The numerical part (such as 002, 005): This string of numbers directly represents the diameter (caliber) of the flowmeter, measured in millimeters (mm). For example: - AXG002 represents a caliber of 2 mm - AXG005 represents a caliber of 5 mm - AXG010 represents a caliber of 10 mm. 2. The correspondence between model and caliber is a very intuitive naming method for wheels, and users can directly determine the basic size specifications of the equipment through the model number. The corresponding relationship between common models and calibers is as follows: | Model | Caliber (mm) | |: --- |: --- | | AXG002 | 2 | | AXG005 | 5 | | AXG010 | 10 | | AXG015 | 15 | | AXG025 | 25 | | AXG040 | 40 | | AXG050 | 50 | | AXG080 | 80 | AXG100 | 100 | | AXG150 | 150 | | AXG200 | 200 | | AXG250 | 250 | AXG300 | 300 | 3. When selecting a model, it is not only necessary to rely on the pure excavation diameter, but also to confirm other key parameters to ensure compatibility with your working conditions: • Measurement medium: must be a conductive liquid. Lining material: It needs to be selected according to the corrosiveness and temperature of the medium (such as PTFE, hard rubber, etc
2. How to cut off the small signal of Yokogawa ADMAG SE 204mm electromagnetic flowmeter
The small signal cutting function of Yokogawa ADMAG SE 204mm electromagnetic flowmeter can be adjusted by entering the setting menu through the local button or communication interface.
. 1. Operation steps • Enter parameter setting mode: Enter the setting menu Senpai through the buttons of the flowmeter body or the HART/RS-485 communication interface (with the help of a handheld device or software), and find the "Flow Cutoff" or "Low Flow Cutoff" option. • Set cut-off value: The cut-off threshold can be expressed in flow units (such as m ³/h) or full scale percentage (%), and empirical values are recommended to be set at 0.5% -5% full scale (0.1% -1% for high-precision applications). For example, when the range is 100m ³/h, 0.5-5m ³/h can be set. • Select the cutting mode: zero mode (output 0 when the flow rate is below the threshold) or hold mode (this mode maintains the previous valid value, suitable for situations that require continuous recording). • Save and exit: After confirming the parameters, save and observe whether the display is stable.2. Precautions - For media with low conductivity or containing bubbles, the cut-off value should be appropriately increased to avoid noise interference. -In batch processing or intermittent processes, it is necessary to ensure that the cu