Current position > Product detail
『Gas turbine flowmeter manufacturer』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
How to install a turbine flowmeter correctly? Hello, KNKE, a manufacturer of turbine flow meters imported from the United States, is pleased to answer your question.
1、 Turbine flow meters can be installed horizontally or vertically. When installed vertically, the fluid flow direction should be from bottom to top, and the liquid must fill the pipeline without bubbles. The direction of the flow of hail should be consistent with the direction indicated by the arrow on the sensor housing. The upstream end should have at least a certain length of straight pipe section, with smooth, clean and tidy inner walls, and no defects such as dents, accumulation, peeling, etc. 2. The axis of the sensor tube should be aligned with the axis of the adjacent pipeline. The gasket for connecting the seal must not penetrate deep into the pipe. Sensors should be kept away from external electric and magnetic fields. Effective shielding measures should be taken when necessary to avoid external interference.
3、 It is recommended to install a bypass pipeline at the location where the turbine flowmeter is installed to avoid affecting the normal flow of liquid during maintenance.
4、 When impurities are present in the fluid, a filter should be installed with a mesh size of 20-60 mesh depending on the flow rate of impurities. When free gas is mixed in the fluid, an air purifier should be installed, and the entire pipeline system should be well sealed. Users should fully understand the corrosion situation of the measured medium and strictly prevent the sensor from being corroded.
5、 When impurities are present in the fluid, a filter should be installed. Users should fully understand the corrosion situation of the tested
_600x400.jpg)
6、 The installation method of flow meters on pipelines: Installing them on horizontal pipelines is a common installation method for flow sensors. When measuring liquids with a turbine flowmeter, if the measuring body contains a small amount of gas, the sensor should be installed at a lower position in the pipeline. The above is the answer from the American imported turbine flowmeter manufacturer, KNKE, on how to correctly install the source skin for turbine flowmeters. If you want to learn more about turbine flowmeter information, please visit the official website of KNKE in the United States.
2. Where can I buy sulfite, calcium chloride, and high-pressure gas turbine flow meters in Guangdong?
Where in Guangdong can I sell sulfite, chlorinated calcium chloride, and high-pressure gas turbine flow meters? Ruiling Group is a reliable supplier with advanced flowmeter technology, affordable prices, and a good social reputation. Ruiling Group focuses on the research and development of high-pressure gas turbine flow meters, which are widely used in industries such as petrochemicals, metallurgy, and textiles. Ruiling Group has developed various types of flow meters based on different media, including pipeline vortex flow meters and plug-in vortex flow meters. The pipeline vortex flowmeter has good universality in terms of medium, and can measure steam, gas, and liquid. It is designed with intelligent integration and can display instantaneous flow rate, cumulative flow rate, and instrument coefficient on site. It is designed with low-power dual power supply and has permanent storage of internal parameters. The plug-in vortex flowmeter has the advantag