Current position > Product detail
『Dial Flow Meter IV: Healthcare Clinical Adjustable Intravenous Fluid Sizers』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Dial Flow Meter IV: Healthcare Clinical Adjustable Intravenous Fluid Sizers
Quick Answer: A dial flow meter IV is a manual plastic device used in hospital intravenous sets to set fluid delivery rates in millilitres per hour. Silver Automation Instruments does not sell that clinical component. We supply industrial flow meters for pharmaceutical water, clean steam, and medical device production lines.
What Is a Dial Flow Meter IV in Clinical Use
A dial flow meter IV is a small rotary regulator attached to an IV line. Nurses turn the dial to a marked number to control the drip rate of saline, dextrose, or medicine. It is a disposable medical part. It does not measure flow with high accuracy. It only limits flow to a rough setting. Most dial flow IV sizers show values like 20, 60, 120, or 250 millilitres per hour.
In hospitals and clinics this device helps staff set a flow without a pump. The actual flow depends on fluid viscosity, the height of the IV bag, and back pressure from the vein. So engineers and procurement teams should not compare it to an industrial flow meter.
Why Silver Automation Instruments Does Not Sell IV Flow Sizers
Silver Automation Instruments is a flow meter manufacturer for process pipes, not for medical disposable sets. Our product range covers Coriolis mass flow meters, electromagnetic flow meters, ultrasonic flow meters, vortex flow meters, oval gear flow meters, thermal mass flow meters, pressure transmitters, and paperless recorders. We focus on oil and gas, water and wastewater, chemical, food and beverage, marine, and pharmaceutical utilities.
If your company designs, builds, or maintains a pharmaceutical plant or a medical device factory, we can support the process side. The IV dial sizer itself may come from a medical supplier. The water system, clean compressed air, and steam that feed that factory need industrial flow meters. That is where we help.
Industrial Flow Meters for Healthcare and Pharmaceutical Plants
Last year a customer in Vietnam asked us for a flow meter on a water for injection distribution loop. The line size was DN25. The water temperature sat at 85 degrees Celsius. Conductivity stayed below 1.3 µS/cm at 25 degrees Celsius. We recommended an electromagnetic flow meter with PTFE liner and 316L electrodes. It had a tri-clamp sanitary connection and a 4-20 mA HART output. The customer connected the signal to a PLC and a paperless recorder.
>
For pharmaceutical water and pure water lines, electromagnetic flow meters work well from DN10 to DN300. They handle low conductivity liquids if the liner and electrodes are correct. For clean steam and compressed air, thermal mass flow meters give direct mass flow readings. They work in pipes from DN15 to DN100. For liquid medicine batching, a Coriolis mass flow meter gives you mass flow, density, and temperature in one device. Accuracy of plus or minus 0.2 percent is common for liquid batching.
In practice, most engineers skip the exact IV dial comparison and move to process flow control. The cost of a wrong flow meter is higher than the meter itself. A failed batch, a rejected water test, or a steam leak can stop production.
Parameters You Need to Send Us
We have seen many customer sites where the inquiry starts with one sentence and we still need more data. To quote a flow meter, send us the fluid name, pressure in bar, temperature in degrees Celsius, pipe size as DN, and flow range in kg/h or L/min. Also tell us the required output signal. The usual options are 4-20 mA HART, pulse, or Modbus RTU.
Call us at Tel: +86-25-68650347, Whatsapp: +86-25-52155837, or WeChat: +86 15365082610. Tell us your process condition and we will suggest a meter that fits.
FAQ
Can Silver Automation Instruments supply an IV dial flow meter for hospital use? No. That product is a medical disposable part. Our factory builds industrial flow meters for process pipes, not clinical IV sets.
Which flow meter works for water for injection loops? An electromagnetic flow meter with PTFE liner, 316L electrodes, and tri-clamp ends is a good fit for DN10 to DN300 clean water loops at up to 85 degrees Celsius.
What flow meter is best for clean steam in a pharmaceutical plant? A vortex flow meter handles saturated steam from 150 to 250 degrees Celsius. For smaller lines a thermal mass flow meter works for compressed air and nitrogen.
Can I use an oval gear flow meter for medicine batching? Yes, if the medicine is viscous and not water thin. Oval gear meters handle oils, syrups, and creams. For low viscosity liquids a Coriolis mass flow meter gives better accuracy and density data.
What output signal should I choose for pharmaceutical process control? 4-20 mA HART is the most common. It gives one signal and digital communication. For batch control some PLCs use pulse output.