Company Profile

Compression Packing Manufacturer and Supplier

Quick Answer: CORASEALS helps buyers source compression packing from qualified packing manufacturers. We supply valve stem packing, pump packing, and gland packing in graphite, PTFE, aramid, and other synthetic fiber materials. Send your stuffing box dimensions, shaft or stem diameter, fluid, pressure, temperature, and pump or valve type for a quote.

Compression packing seals a valve stem or pump shaft inside a stuffing box. Compression packing works by controlled compression and controlled leakage. CORASEALS helps procurement teams, maintenance crews, and OEM buyers source standard and custom compression packing products. Buyers searching for a compression packing manufacturer can use CORASEALS as a sourcing and supply partner.

Compression Packing Products We Supply

CORASEALS supplies braided compression packing, die-formed packing rings, gland packing, valve stem packing, and pump packing. We source products in graphite, PTFE, aramid, carbon fiber, acrylic, fiberglass, and vegetable fiber materials.

Compression Packing Material Selection

Do not select packing by material name alone. Confirm the process fluid, pH, pressure, temperature, and shaft speed before choosing a packing material. Graphite packing has service limits in strong oxidizers. PTFE packing has compatibility limits in some fluorine compounds and molten alkali metals.

• Graphite packing: common in steam valves, high temperature valve stems, and chemical pump glands.
• PTFE packing: used in chemical pumps, low friction valve stems, and services that require good chemical compatibility. Food or pharmaceutical service requires a suitable grade and documentation.
• Aramid packing: suited to abrasive media, high pressure water, and pumps with solids.
• Synthetic fiber packing: used in general water and oil services in pumps and valves.

The final material recommendation must match the equipment manual and the actual service conditions.

How to Specify Compression Packing Correctly

Packing size is not only the shaft or stem diameter. The stuffing box bore and stuffing box depth are also required. To calculate packing cross section, subtract the shaft or stem diameter from the stuffing box bore, then divide by two. Confirm this cross section against the existing packing ring or the equipment manual before ordering.

Packing cross section is commonly specified in millimeters or inches. The cross section must match the stuffing box dimensions, not the pipe size or valve size alone.

For a compression packing quote, provide the following:

• Valve or pump type
• Shaft or stem diameter
• Stuffing box bore
• Stuffing box depth
• Process fluid and pH
• Pressure and temperature
• Shaft speed for pump packing
• Required quantity

Common Applications for Compression Packing

Compression packing is used on gate valves, globe valves, ball valves, centrifugal pumps, slurry pumps, agitators, and reciprocating pumps. Packing is often accepted where controlled leakage and easy replacement are required. Mechanical seals may be required when leakage must be very low or when the service is outside packing limits.

What CORASEALS Provides

CORASEALS supports compression packing buyers with material comparison, size calculation, and packing ring selection. We do not promise full interchange based only on a code or a brand name. A cross-section check, dimension check, and material check are required for every packing order.

Frequently Asked Questions About Compression Packing

1. What is the difference between compression packing and gland packing?

Gland packing is a type of compression p