『Endress Hauser Mass Flow Meter Technology: High-Accuracy Density, Temp, and Mass Outputs』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Endress Hauser Mass Flow Meter Technology: High-Accuracy Density, Temp, and Mass Outputs
Quick Answer: A Coriolis mass flow meter gives you mass flow, density, and temperature from one sensor. Silver Instruments supplies this meter for process lines from DN15 to DN100. Send us your pressure in bar, temperature in °C, pipe size, and flow range for a quotation with the same output style used in Endress Hauser mass flow meter technology.
Process engineers in oil and gas, chemical, food, and marine plants often search for Endress Hauser mass flow meter technology with high-accuracy density, temp, and mass outputs. The real requirement is not the brand name alone. The real requirement is repeatable mass flow data, density for concentration, and process temperature from one Coriolis sensor.
Silver Automation Instruments supplies Coriolis mass flow meters that follow the same multivariable output structure. The meter measures mass flow directly. It also reports process temperature through a built-in PT100 sensor. Density is calculated from the tube frequency. All three values go to the control room over 4-20 mA HART, RS485 Modbus, or pulse.
What You Get From the Multivariable Output
Here is the thing. A Coriolis meter does not need pressure and temperature compensation for mass flow. It measures mass directly. That is why refinery, chemical, and food batching systems rely on it. The density output is also useful for concentration. In a food plant, you can watch Brix or solids content. In a chemical plant, you can watch acid concentration or solvent ratio. Temperature from the PT100 acts as a process check and helps with density correction inside the transmitter.
Typical output wiring from a Silver Instruments Coriolis meter includes one 4-20 mA HART loop for mass flow, one for density, and one for temperature. Some buyers add a pulse output for total flow. The transmitter has a local display. No external flow computer is required.
Endress Hauser Mass Flow Meter Technology Compared in the Field
Endress Hauser mass flow meter technology is often specified because plant drawings show the Promass style sensor and HART outputs. Silver Instruments supplies an industrial Coriolis meter that fits the same pipe class and output scheme. The practical gain for many SME buyers is shorter lead time and lower cost for the same process data.
We have seen this on customer sites many times. A plant keeps the existing PLC block and the same HART address. They replace the sensor and transmitter, then resume production. No engineering house needs to redraw the loop sheet.
Recommended Line Sizes and Process Conditions
We size these meters from DN15 up to DN100. For a DN15 line with 0 to 500 kg/h of solvent,
Water and wastewater projects sometimes need conductivity as a separate value in µS/cm. The Coriolis meter still handles mass flow, density, and temperature on the same line.
Customer Example From a Paint Plant
Last year a paint manufacturer in Vietnam asked us to replace an older Endress Hauser mass flow meter on a solvent dosing line. The line was DN25, flow range 0 to 800 kg/h, pressure 6 bar, temperature 30 to 40 °C. We supplied a DN25 Coriolis meter with 316L wetted parts, 4-20 mA HART output for mass flow and density, and a PT100 temperature signal. The plant used the density value to control batch consistency. Wiring was completed in one shift because the output terminals followed the same HART convention.
Contact and Quote Details
For a price quote or a technical check, send us your fluid, flow range in kg/h or t/h, operating pressure in bar, temperature in °C, pipe size in DN, and hazardous area requirement such as ATEX Zone 1 or IECEx. We will match a Coriolis mass flow meter to your process data and offer a written quotation.
Tel: +86-25-68650347
WhatsApp: +86-25-52155837
WeChat: +86 15365082610
Web: flow-meter.com.au
Five Key Questions on Coriolis Density and Mass Output
Q1. Does a Coriolis meter really measure density and temperature at the same time?
Yes. The sensor tube oscillation gives density. The built-in PT100 gives process temperature. Mass flow is measured directly from the Coriolis force.
Q2. What output signals are available?
4-20 mA HART is standard. Density and temperature each can be assigned to a separate analog output. RS485 Modbus, pulse, and relay outputs are optional.
Q3. What line sizes can Silver Instruments supply?
We normally supply DN15, DN25, DN40, DN50, DN80, and DN100. Smaller and larger sizes can be checked case by case.
Q4. Is the meter suitable for hazardous areas?
Yes. Flameproof housings are available for ATEX Zone 1. We also supply IECEx versions for countries that follow that scheme.
Q5. What information do you need for a quotation?
Send us the fluid, flow range, pressure in bar, temperature in °C, pipe size in DN, and any hazardous area requirement. We will reply with a price and lead time.
Hot News
Related AD
